How to install tray seedling seeder

When installing the six-tray seeder, how do you install the tray? Let me explain to you how to sow the plug seedling seeder. Assembling the plate: First of all, the substrate should be prepared, and the prepared substrate should be placed in the plate. When loading the plate, be careful not to tighten it with force, because after tightening, the physical properties of the substrate will be damaged, which will reduce the air content in the substrate. The content of absorbable water is reduced. The correct method is to use a scraper to scrape from one side of the plug tray to the other so that each plug tray is filled with substrate, especially the holes in the four corners and edges of the tray, which must be the same as the holes in the middle. The matrix cannot be overfilled, and each compartment should be clearly visible when filled.

Pressing holes: The installed trays need to be pressed to facilitate the insertion of seeds into them. You can use a specially made hole press to press the holes. You can also stack the trays with substrates vertically together, and sow 4 to 5 trays at a time. Place an empty plate, place both hands flat on the plate and press down evenly to the required degree.